BONFIGLIOLI active cube 201, Руководство по эксплуатации

Страница: 180 / 285

180 Operating Instructions ACU 12/16
16.3.3 Reference value reached
In Operation Mode 5 - “Reference Frequency reached” for a digital output , a message will be
generated via the relevant output once the actual frequency has reached the setpoint.
In Operation Mode
6 - “Reference Percentage reached” for a digital output , a message is generated
via the corresponding output when the actual percentage has reached the reference value.
Signal source 163 - "Reference frequency reached" or 178 - "Reference percentage reached" can be
linked to the functions of the frequency inverter.
The hysteresis can be defined as a percentage of the adjustable range (Max - Min) via the
parameter
Max. Control Deviation
549 .
Parameter Setting
No. Description Min. Max. Factory setting
549 Max. Control Deviation 0.01% 20.00% 5.00%
Op. Mode Digital Output 1
530
or
5 - Reference Frequency reached
or
6 - Reference Percentage reached
(
Configuration
30 = x11, x30)
Op. Mode Digital Output 2
531
or
Op. Mode Digital Output 3
532
With extension module:
Op. Mode EM-S1OUTD
533
or
Op. Mode EM-S1OUTD
534
Max. Control Deviation
549 set value [%].
For linking to functions 163 - Reference Frequency reached
or
178 - Reference Percentage reached
(
Configuration
30 = x11, x30)
Example:
Hz 325 . 2 % 5 ) Hz 5 . 3 Hz 50 (
[%] ) (
[%] f ] Hz [ Deviation Control . Max
   
  
  
549 418 419
549
Deviation Control Max. Frequency Minimum Frequency Maximum
Deviation Control Max.