Boneco P700, Инструкция по эксплуатации

Страница: 19 / 40

19
en
CLEARING THE FILTER WARNING
The symbol does not go out automatically after the
filter has been replaced. Press and hold the button
for five seconds to hide the symbol. This also resets the
counter for the new filter at the same time.
FILTER WARNING AND FILTER CHANGE
“FILTER WARNING” INDICATOR
The icon signals that both filters are used up and have
to be replaced so that the BONECO P700 maintains opti-
mum effectiveness.
This icon is shown after approximately one year of operat-
ing. The effective usage time varies with the air pollution
and the associated fan power. The BONECO P700 takes
these values into account automatically.
Operation stops as soon as your remove the cover. The
appliance only continues running again after you have put
the cover back on. All settings are retained during the
interruption. The timer, however, continues to run during
this time.
SOURCE OF SUPPLY
You can get the replacement filters at your
BONECO specialist dealer or at the online store at
www.shop.boneco.com . Both filters are always con-
tained in a set.
REPLACING THE FILTER
1. Take off the filter cover.
2. Take the used filter out of the appliance by pulling on
the two tabs simultaneously.
3. Remove the protective foil.
4. Place the new filter into the housing. Make sure the
filter is parallel to the appliance.
5. Reattach the filter cover.
6. Replace the second filter the same way.
7. Dispose of the used filters together with your house-
hold waste.