9
Never use a machine for anything else or use accessories other than those
described in this manual.
Service or repairs performed by unauthorized persons can cause damage or accidents. If service
and repairs are performed by unauthorized persons, the warranty may become invalid. Service
and repairs must be performed by Bona or staff approved by Bona.
Be aware when you work. Use common sense. Do not use the machine if you are tired,
have consumed alcohol or have taken medication that can affect your judgment or your body
control. Due to the potential fire hazard involved with sanding dust, smoking is not permitted
while sanding.
Always use a grounded circuit breaker.
Safety Instructions (Cont.)
Bona FlexiSand DCS Buffer in General
The machine is only intended for work on level surfaces with a maximum slope
of 2%. The machine is not intended for pure concrete sanding. Never run the
machine over power cables, or you may risk a short circuit.
The operation of the Bona FlexiSand DCS
®
Buffer is subject to applicable national regulations.
Beyond the user manual and the applicable rules in the country for preventing accidents, the applicable technical trade provisions for
safety and professional work methods must be followed.
The Bona FlexiSand DCS
®
Buffer is only intended for indoor use at temperatures between 10˚C (50˚F) and 35˚C (95˚F) and in good
lighting. When you work with the machine, be observant of the surroundings and particularly persons nearby. Do not use the machine
around children. The manufacturer is not responsible for injuries that occur via such use. In this case, the user assumes full risk. In
addition to the normal usage instructions, the manufacturer's care and maintenance instructions must also be followed.
The manufacturer is not liable for any damage to the machine resulting from prohibited changes. The manufacturer is not liable for
damage to the machine or to the floor covering to be sanded.
Normal use
