Bompani BO293MQ/N, Инструкция по эксплуатации

Страница: 11 / 28

11
TECHNICAL CHARACTERISTIC TABLES
BURNERS
GAS
NORMAL
PRESSURE
NORMAL
RATE
I N J E C T O R
DIAMETER
TAPE BY
PASS
DIAMETER
NOMINAL HEAT
INPUT (W)
(EE
gas
hob
)
N° DESCRIPTIONS mbar g/h L/h 1/100 mm 1/100 mm Max. Min. (%) *
1 RAPID
G30 - G31 28 - 30 225 - 85 42 3000 950
56.7
G20 20 - 290 115Y Reg. 3000 950
2 SEMI-RAPID
G30 - G31 28 - 30 126 - 65 31 1750 600
57
G20 20 - 165 97Z Reg. 1750 600
3 AUXILIARY
G30 - G31 28 - 30 71 - 50 27 1000 450
/
G20 20 - 99 72X Reg. 1000 450
4
TRIPLE RING
SABAF
G30 - G31 28 - 30 278 - 98 60 3800 2100
58.1
G20 20 - 367 135K Reg. 3800 2100
5
DOUBLE RING
DEFENDI
G30 - G31 28 - 30 255 - 93 60 3500 2100
56.6
G20 20 - 334 135 Reg. 3500 2100
Short title or reference to the measurement and calculation methods used to establish compli-
ance with the above requirements.
The performance of each individual burner is calculated according to standard EN 30-2-1 + A1:2003 +
A2:2005
The total efficiency of the hob is calculated according to the EU Regulation 66/2014 Par. 2.2
The efficiency is calculated only for the burners with a nominal capacity exceeding 1,16 KW ( EN 30-2-1
+ A1:2003 + A2:2005; Par. 4.1)
Information which is relevant to the customer to minimize the energy consumption during usage:
Energy Saving Tips: use pots having flat base, Use pots with proper size, use pots with lid, minimize the
amount of liquid or fat, when liquid starts boiling reduce the setting.
This product complies with EU Directive 2002/96/EC.
The crossed-out dustbin symbol reported on the appliance indicates that the appliance must be
disposed of separately from other domestic refuse at the end of its useful life. It must therefore be
delivered to a waste recycling centre specifically for electric and electronic equipment or returned
to the retailer at the moment of purchase of a new equivalent appliance.
The user is responsible for delivering the appliance to the appropriate collection centre at the end of its useful
life, Failure to do so may result in a fine, as provided for by laws governing waste disposal. Differential collection
of waste products for eventual recycling, treatment and environmentally friendly disposal helps reduce possible
negative effects on the environment and health, and also enables the materials making up the product to be
recycled. For more detailed information on the available refuse collection systems, refer to the local Municipal
Solid Waste disposal centre or the shop where the product was purchased. Producers and importers are
responsible for fulfilling their obligations as regards recycling, treatment and environmentally friendly disposal by
directly or indirectly participating in the collection system.