BOMBARDIER SEA-DOO GTX RFI 5666 1998, Руководство пользователя

Страница: 23 / 47

Section 04 FUEL SYSTEM
Subsection 02 (FUEL INJECTION)
04-02-6
DIAGNOSTIC PROCEDURES
The MPEM programmer is the primary tool to di-
agnose fuel injection related problems.
The latest software designed for the RFI model
allows sensor inspection, diagnostic options (stat-
ic and dynamic) and adjustment such as the Throt-
tle Position Sensor (TPS).
NOTE: Make sure your MPEM programmer is up-
dated with the latest software version. For a com-
plete overview of the programmer, refer to the
MPEM Programmer Guide (P/N 219 700 090).
Diagnostic Option Example
Turn on the programmer and enter your pass-
word.
Select VEHICLE INFO from the main menu and
press ENTER .
1. CHECK KEYS
2. PROGRAM KEY
3. VEHICLE INFO
4. START VEH.
5. OTHERS
By selecting the VEHICLE INFO you will access a
9-line sub-menu. Select BOSCH SYSTEM from
the sub-menu and press ENTER .
1. CUSTOMER NAME
2. DELIVERY DATE
3. VEH. SERIAL
#
4. ENGINE PARAM.
5. PROGRAM KEY
6. HOUR INFO.
7. MPEM INFO.
8. BOSCH SYSTEM
9. SAVE + QUIT
By selecting BOSCH MENU you will enter a sec-
ond sub-menu. Select DIAGNOSIS and press
ENTER .
1. DIAGNOSIS
2. START VEHICLE
By selecting DIAGNOSIS the following message
“ INITIALIZING IN PROCESS ” will be displayed a
few seconds, then a new menu will appear on the
screen.
Select READ FAULT and press ENTER .
1. BOSCH INFO
2. READ FAULT
3. ERASE FAULT
4. ADJUSTMENT
5. REAL TIME
6. END DIAGNOSIS
NOTE: Line no. 1 BOSCH INFO will display the iden-
tification of the watercraft and the MPEM/ECU.
By selecting READ FAULT , the MPEM program-
mer will display the number of faults in the ECU
memory and the codes related with the fault(s).
The programmer will offer PRESS ANY KEY . If
there is more than 1 fault in the ECU memory, the
next fault code will be displayed.
NOTE: On this model, there is always at least the
04 FC fault code. Ignore this fault code. Also,
when the engine is NOT operating, a fault code
will be displayed for the CPS. It should not be con-
sidered as a fault in the static mode.
Refer to the tables on next page for the explana-
tion of the fault codes.
After reading the fault codes in the memory of the
ECU,
PRESS ANY KEY will return the program-
mer to the latest menu.
By selecting ERASE FAULT in the menu, it will
allows you to erase the faults in the ECU memory.
NOTE: The programmer will not allows fault code
erasing without first viewing in the READ FAULT .