BOMANN VS 7316.1, Инструкция по эксплуатации, Страница: 18 / 24

18
Electrical connection
WARNING:

The installation to the mains supply must conform
to the local standards and regulations.

Improper connection may cause to an electric
shock!

Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.

The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.

Make sure that the voltage supply matches the
specifications on the rating label before connect-
ing.

Connect the mains cable to a properly installed
and earthed wall outlet.

If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Reversing the door opening
If required, the door opening can be moved from the
right (supplied condition) to the left side.
WARNING:
When replacing the door stop, the appliance must be
disconnected from the power supply first.
NOTE:

Ask another person to assist.

You possibly need:
screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.

*Delivery scope!
Keep the parts to be replaced for another possible
door stop change.

Remove the hinge cover and the blanking cap.

Dismount the upper door hinge and lift out the
appliance door.

Transfer the doorstop on the door underside. Set
the appliance door safely aside.

Tilt the unit slightly backwards and lock it in this
position. Unscrew the feet and disassemble the
lower door hinge.

Move and fasten the lower door hinge to the op-
posite appliance side. Screw in the feet accord-
ingly.

Put the appliance back in the upright position. Put
on the appliance door and fix it in the intended
position.