BOMANN KSE 227.1, Инструкция по эксплуатации, Страница: 18 / 28

18
Transport and
Transport and Transport and
Transport and Unpacking the Appliance
Unpacking the Appliance Unpacking the Appliance
Unpacking the Appliance
Transport the appliance
Transport the appliance Transport the appliance
Transport the appliance
Transport the appliance, if possible, only in vertical
position. Otherwise, it is absolutely necessary to
allow the appliance standing upright for a few hours
before installation ”Prior to first use”. Protect the ap-
pliance during transport against weather influences.
Unpack the appliance Unpack the appliance Unpack the appliance Unpack the appliance
•
Remove the appliance from its packaging.
•
Remove all packaging material, such as foils, filler
and cardboard packaging.
•
To prevent hazards, check the appliance for any
transport damage.
•
In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION: CAUTION: CAUTION: CAUTION:
Pull off the protective foil from the appliance sides.
NOTE NOTE NOTE NOTE::::
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Overview
Appliance Overview Appliance Overview
Appliance Overview
1111 4-Star freezer compartment
2222 Temperature control / interior light
3333 Height-adjustable glass shelf
4444 Door storage racks
5555 Vegetable boxes with glass shelf
Delivery scope
Delivery scope Delivery scope
Delivery scope
1 x height-adjustable glass shelf, 2 x vegetable box
with glass cover, 2 x door storage rack (incl. metal
rod for bottle holder), 2 x egg tray, 1 x ice-cube tray,
built-in material
Installation
Installation Installation
Installation
Condition Condition Condition Conditions for the installation location s for the installation location s for the installation location s for the installation location
•
Good ventilation is required around the appliance,
in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power
consumption. Sufficient clearance is necessary.
-
Refer to the instructions which we give you in
“Built-in”;
-
Clearance to the front must be created so that
the appliance door can open without being im-
peded.
•
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to chapter “Technical Data” or to the rating label
located in the interior or on the rear side of the
appliance.
•
Look for stable, horizontal appliance position.
•
Avoid the installation:
Avoid the installation: Avoid the installation:
Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
-
at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
-
near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
-
Do not expose the appliance any weather.