BOMANN KS 7315.1, Инструкция по эксплуатации, Страница: 28 / 40

28

If the plug after installation is not
accessible, a corresponding discon-
nect device must be available to meet
the relevant safety regulations.
Reversing the door opening
If required, the door opening can be
moved from the right (supplied condition)
to the left side.
WARNING:
When replacing the door stop, the appli-
ance must be disconnected from the
power supply first.
NOTE:

Ask another person to assist.

You possibly need:
screw wrench,
Phillips screwdriver as well as a thin-
blade screwdriver.

Keep the parts to be replaced for
another possible door stop change.

Loosen the screws on the unit back
and remove the unit cover.

Dismount the upper door hinge and
the opposing screws (s) and lift the
unit door.

Transfer the door stopper on the
underside of the door and set the unit
door safely aside.

Tilt the unit slightly backwards and
block it in this position. Unscrew the
feet and remove the lower door hinge.

Transfer and attach the lower door
hinge to the opposite unit side; after
unscrewing the hinge pin and rein-
stalling it from the other hinge side.
Screw in the feet accordingly.

Put the unit back in the upright posi-
tion. Put on the unit door and fix it in
the intended position.

Transfer and attach the upper door
hinge to the opposite unit side; after