manualshive.com logo in svg

Bomag BW 100 AD-5, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Bomag BW 100 AD-5 Скачать руководство пользователя страница 173

8.11.2  Changing the coolant

Perform this maintenance work at

the latest after two years.

Do not start the engine after draining off the

coolant.
In case of lubrication oil entering into the

cooling system or a suspicious turbidity caused

by corrosion residues or other suspended

matter, the coolant must be drained off and the

complete cooling system needs to be cleaned.
Oil can damage the sealing materials used in

the cooling system.
If oil has entered, you must add a cleansing

agent in order to remove any residues from the

system. Follow the instructions of the manufac-

turer! If in doubt, consult your Customer

Service or the engine manufacturer.
When changing the coolant without any signs

of contamination, cleaning of the cooling

system is not necessary.

NOTICE!
Danger of engine damage!

– Use only coolant of the permitted

specification

 

Ä

 Chapter 8.3.3

„Coolant“ on page 144

.

– Do not mix different coolants and

additives of any other kind.

– Filling quantity: 

Ä

 Chapter 8.4

„List of fuels and lubri-

cants“ on page 146

Maintenance – Every 2000 operating hours

 

BW 100 AD-5

 

173

Содержание BW 100 AD-5





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды