Bolton Tools BF20VL, Руководство пользователя, Страница: 10 / 56

Page 10
1.6 Safety check
Check the drilling-milling machine regularly.
Check all safety devices
before starting work,
once a week (with permanent operation),
after every maintenance and repair operation.
1.7 Personnel protective equipment
For certain work peersonnel protective equipment is required.
Protect your face and eyes
: During all work and specifically work during which your face and eyes
are exposed to hazards, a safety helmet with a face guard should be worn.
Use protective gloves when handling pieces with sharp edges
.
Use safety shoes when you position, dismantle or transport heavy components
.
Use ear protection if the noise level
(immission) in the workplace exceeds 80 dB (A).
Before starting work, make sure that the prescribed individual protection gear is available at the
workplace.
CAUTION!
Dirty or contaminated personnel protective equipment can cause disease. Clean it each
time after it has been used and once a week.
General check
Equipment Check OK
Protective covers Fitted, firmly bolted and not damaged
Labels,
markings Installed and legible
Run test
Equipment Check OK
EMERGENCY-STOP but-
ton When the EMERGENCY-STOP button is activated, the drilling-
milling machine should switch off. A restart will not be possible
until the EMERGENCY-STOP button has been unlocked and the
ON switch has been activated.
Separating protective
equipment around the dril-
ling and milling spindle Only switch on the drilling-milling machine if the protective equip-
ment is closed.