Boltek ANT-50, Руководство по установке и эксплуатации

Страница: 18 / 33

C H A P T E R 3 - C O N F I G U R I N G
12
Configuring the LRX-1
The LRX-1 is a Linux based lightning detector.
After booting the script
/etc/rc.local
is executed, which starts the LRX detection software.
LRX software reads its configuration file LRX.ini, then connects to the server(s) listed in the file.
The LRX-1 supports up to 6 LDN servers. The connection status of Server 1, 2 and 3 are indicated
on the front panel LEDs. Flashing indicates a connection is being attempted. Solid indicates an
established connection.
Servers 1, 2 and 3 are Control Servers and have the ability to remotely configure the LRX-1. Servers
4,5 and 6 are Data Only Servers and do not have the ability to make any changes to the LRX-1 other
than disconnecting their own connection, triggering an automatic reconnect.
Chapter
3