Bolin Technology DANTE AV D Series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 47

Bolin Technology DANTE AV D Series Скачать руководство пользователя страница 15

15

Transmit Tab

The Transmit tab is used to inspect and modify the transmit configuration of a device.
Transmit Tab with Bolin Dante AV camera

Transmit Tab with Bolin Dante AV decoder

The Transmit Tab is arranged into two areas:

■

Transmit Channels

: The area on the left pane of the tab shows the Tx channels for the device. It

allows you to edit channel names for transmit channels. Input to the table is filtered to prevent
illegal characters from being used in channel names.

Supported devices will also show the following channel metering icons in the

Signal

column,

indicating the presence of audio on subscribed channels:

Channel is either muted, or receiving audio at less than -61dbFS

Channel is receiving audio between -61dbFS and 0dbFS

Channel is clipping

For video, ancillary and privately encoded audio channels, supported devices may also show the

following status icons in the

Signal

column:

Indicates there are no external connectivity problems with the Tx
device

Indicates there is an external connectivity problem with the Tx device

Dante Controller cannot ascertain if there are any external
connectivity problems with the Tx device

«
...
13
14
15
16
17
...
»

Содержание DANTE AV D Series
















































Отзывы:

Нет отзывов