The Bogen RM350D is a unique, self-contained paging
system for small- to medium-sized applications. It
combines a digital tuner, microphone, and aux inputs
with a 35-watt output capable of driving 4- and 8-ohm
speaker systems as well as 25 or 70 volt distributed
systems.
The tuner section uses a PLL synthesizer to provide
accurate frequency selection. An LCD display shows
the frequency readout. The tuner may be programmed
with up to
1
8 FM and
1
2 AM preset stations.
Pushbuttons are provided to tune stations, select pre-
sets, and scan preset stations.
Microphone input accepts a balanced Lo-Z micro-
phone. The input uses a three-pin standard mic con-
nector and has its own volume control. The input
includes a switch-selected ALC circuit to maintain a
uniform output level. The input also includes VOX-
activated music muting of the program from tuner or
aux source. Provisions are included to mute the pro-
gram using dry contacts from a customer-supplied
switch (selectable for normally open or closed; facto-
ry set for normally open).
A pushbutton on the front panel is used to select pro-
gram from the tuner or aux input. The aux input con-
sists of an RCA jack and can accept signal from a cas-
sette tape, CD, or other line level source. Bass, treble
and volume controls are provided to adjust the level of
selected program (does not affect the microphone
input).
The receiver permits connection of up to four switch-
selected paging zones. A pushbutton is included to
select all zones at once. A pre-page output lets you
route tuner or auxiliary program to a telephone
music-on-hold input. The output is not affected by vol-
ume, bass, or treble settings.
The receiver can accept input from a telephone line
when an accessory transformer (the Bogen Model
WMT
1
A) is used as the interface.
Output taps are provided for direct connection of 4-
and 8-ohm speakers and for connection of 25 or 70
volt distributed systems. Individual zone taps are pro-
vided for ease of connection. An impedance jumper is
provided to set the output signal on the zone taps.
The receiver operates from nominal
1
20V/60Hz AC.
It may be rack-mounted using optional accessory
brackets (Model RPK47), or placed upon a shelf. An
FM dipole antenna, AM loop antenna, mono patch
cord, and stereo-to-mono patch cord are included
with the unit.
• PLL synthesized tuning with digital readout
•
1
8 FM &
1
2 AM presets
• 35-watt audio output
• Switch-selected page zones
• MIC includes VOX- or contact-activated music
muting
• MIC input Automatic Level Control (ALC)
• Memory scan
• Bass and treble controls
• AUX input
• UL listed
Features
Description
Specifications subject to change without notice.
©
1
996 Bogen Communications, Inc.
Part No. 54-7876-0
1
R2 Printed in U.S.A. 0
1
09
AM/FM
35-Watt
Digital Receiver
Model RM350D
