Relay / Input / Output
Transformer-Balanced
Module
Model RIO1S
Description
Features
Bogen’s RIO
1
S is a multi-functional module with a priority-controlled relay contact, transformer-balanced input,
transformer-balanced output, and an RJ
11
output for direct connection to the override input of a zone paging
system.
The RIO
1
S provides a convenient way to integrate a Power Vector amplifier with a PCM zone paging system,
allowing full use of the Power Vector’s priority structure in zone paging applications for more sophisticated
paging capabilities.
•
Transformer-isolated, balanced line-level input
•
600-ohm or
1
0k-ohm (jumper selectable) input
impedance
•
Transformer-isolated, balanced line-level output
•
8-ohm, 0.75W output
•
Input and output level controls
•
Relay responds to jumper selectable priority level
•
N.O. or N.C. jumper-selectable relay contact
•
External control of priority muting buses
•
Input can be muted from higher priority modules,
with signal fade back
•
Output (normally gate) can be synched with
priority relay operation
•
Output gating can be defeated via jumper
•
RJ
11
connection with line output and dedicated
N.O. relay contact (allows easy connection to O/R
port of Bogen telephone paging interfaces)
Block
Diagram
Specifications subject to change without notice.
© 2004 Bogen Communications, Inc.
Part No. 54-80
1
9-0
1
C 0705
Output
• Jumper-selectable, transformer-balanced output with
gain and priority gating (synched with prioritized
relay)
Page Port Output
• Specialized PCM2000 / Page Port-type output with
audio signal and dedicated N.O. contact (RJ
11
jack)
Relay Contact
• Prioritized Relay (N.O. or N.C. contact) allows
external devices to be activated when specific priority
levels are met
Mute Control
• External control of priority mute buses
Input
• Transformer-balanced (600-ohm or
1
0k-ohm) input
with gain and defeatable priority mute
1
2
3
4
5
6
Enabled
Disabled
Gate
Relay
Out (–)
Out (+)
Relay
