1
Configuring the Nyquist VoIP Speakers
The Nyquist VoIP Ceiling Speaker Gen 2 (NQ-S1810CT-G2) and Nyquist VoIP Wall Baffle
Speaker Gen 2 (NQ-S1811WT-G2) are VoIP talkback speakers designed to work with the
Nyquist Series IP network-based intercom and paging solution.
The ceiling talkback speaker assembly consists of an 8" cone speaker and VoIP module
preassembled onto a 13" steel ceiling grille painted with bright white enamel.
The VoIP wall baffle talkback speaker assembly consists of an 8" cone speaker and VoIP
module preassembled onto a bright white injection-molded wall baffle speaker enclo
-
sure.
Both types of speakers are 802.3af-compliant and are designed to facilitate rapid and effi
-
cient deployment using existing network Power over Ethernet (PoE) ports. They also have
a Form-C relay for controlling third-party devices. These VoIP speakers enable ease of
placement wherever needed within a facility.
A short press of the appliance’s
Reset
button reboots the device. If you press the
Reset
button for 10 seconds, the appliance returns to the factory default configuration settings.
(Returning to the default configuration settings does not change the appliance’s firm
-
ware.)
The Nyquist server can automatically discover and configure the Nyquist VoIP speakers,
but you can also manage the device and manually configure some settings through the
web-based user interface (web UI). The following sections describe the process for
manual configuration. For information about using Nyquist’s automatic configuration
process, refer to the
Nyquist System Administrator Guide
.
To access the appliance’s UI:
Figure 1. Nyquist Appliance Login
