9
Configuration Settings Tab Parameters
The easiest way to configure Nyquist appliances is to obtain configuration settings from
the Nyquist server by selecting
Get Configuration From Server
. However, you can man
-
ually configure an appliance through the appliance’s Web UI when Standalone Operation
"Standalone Operation Configuration Settings” on page
).
To view the Nyquist appliance configuration:
1
On the appliance Web UI’s main page, select
Configuration Settings
.
2
View the settings as described in Table
10 for normal configuration, or
modify the settings as described in
"Standalone Operation Configuration Settings” on
for Standalone Operation configuration.
3
If changes were made (Standalone Operation only), click the
Save Configuration
Settings
and/or
Save Multicast Addresses
buttons to save your changes.
DHCP Enabled
Indicates if the device is enabled to use DHCP to
retrieve its IP configuration.
Reboot Appliance
Indicates that this appliance should reboot when the
Save button is clicked.
Figure 5. Appliance Configuration Settings (Standalone disabled)
Table 4. Network Settings (Continued)
