17
6.2
Muting a Channel
You can mute a channel to cut off an audio signal and stop the pro-
duction of sound.
To mute a channel:
Step 1
On the appliance Web UI’s main page, select
DSP
.
Step 2
Select the
Mute
button for the channel that you want
to silence.
The
Mute
button will illuminate red. You can select the
Mute
button again to unmute the channel.
6.3
Adjusting Compression Settings
A compressor slightly reduces the dynamic range of a signal. This
effect is perceived to quiet loud sounds and boost quiet sounds. A
compressor smooths transients. Compressor parameters are set per
channel. The Compressor dialog box has LEDs for the input and
output signals.
To adjust the compressor settings for a channel:
Step 1
On the appliance Web UI’s main page, select
DSP
.
Step 2
Select the
Menu
button for the channel.
Step 3
From the drop-down menu, select
Compressor
.
Figure 8, Compressor Settings
Содержание NYQUIST NQ-GA20P2
