background image

114

Table 7-1, Display Message Options

Text

Type the message that is to appear on the 

display monitor.
You can format text using basic HTML tags, 

such as:
• <b> for bold
• <i> for italic
• <u> for underline

Expiration Mode

Select the mode for setting the message’s 

expiration. Options are:

Display Time

. Uses 

Display Time (sec-

onds)

 to set the expiration.

Manually Removed

. Sets the expiration 

time to Never. You must use the 

Remove 

Message

 button remove a message from 

the message queue, or the message can 
be removed by a Routine Action using the 
display message 

Identifier

.

Date/Time

. By default, the current date 

and time appears in the 

Date/Time

 field.

Display Time 
(seconds)

Appears only if 

Expiration Mode

 is set to 

Display Time

. Sets the length of time for the 

message to be displayed before it expires. 

Time can range from 1 to 99999.

Date/Time

Appears only if 

Expiration Mode

 is set to 

Date/Time

. By default is set to the current 

date and time. To change the date, select the 

calendar and pick the date and time. 

Zones

Select the zone or zones. Messages will be 

sent to the display devices in the selected 

zones.

Stations

The message is sent to the specified stations 

and any stations that belong to the specified 

zones.

Identifier

Used to identify the message so it can be 

deleted by a Routine action.

Содержание Nyquist C4000 Series



















































































































































Отзывы: