background image

8

Ventilation

The amplifier is passively cooled so care must be taken to make cool air available to the amplifier. Do not operate
this amplifier in environments that get hotter than 100 deg. F. If the amplifier is to be free standing, do not remove
the feet on the amp since they provide a space on the bottom of the amp for cooling air intake. Likewise do 
not slide books or papers under the amp which will reduce the intake area for the cooling air. Be certain not to
place anything on top of the amp which will block the top ventilation slots. Keep anything mounted above the
amplifier at least 1.75 inches away.

Cooling

Rack Mount Adapter

A rack mount adapter RPK93 is available to allow mounting of either a single amplifier or two amplifiers side by
side. The amplifier and rack mount adapter use 2 rack spaces (2RU) of height.

NOTE: One (1) rack space both above and below the amplifier will also be needed to ensure proper ventillation.

Accessories

The 

Bogen CC4021 Amplifier

is warranted to be free from defects in material and workmanship for three (3) years from the date of sale to

the original purchaser. Any part of the product covered by this warranty that, with normal installation and use, becomes defective (as con-
firmed by Bogen upon inspection) during the applicable warranty period, will be repaired or replaced by Bogen, at Bogen’s option, provided
the product is shipped insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA. Repaired or
replacement product will be returned to you freight prepaid. This warranty does not extend to any of our products that have been subjected
to abuse, misuse, improper storage, neglect, accident, improper installation or have been modified or repaired or altered in any
manner whatsoever, or where the serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER’S SOLE AND
EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED
TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. 

Bogen's liability arising out of the manufacture, sale or supplying of products or their

use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product. 

IN NO EVENT SHALL

BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF
PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF PROD-
UCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES.

Some States do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from State to State.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department – same address as above or call 201-934-
8500. The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All
shipping charges in addition to parts and labor charges will be at the owner's expense. All returns require a Return Authorization number.
For most efficient warranty or repair service, please include a description of the failure.

12/2008

Limited Warranty; Exclusion of Certain Damages

Содержание CC4021













Отзывы: