Bogen CC4021, Инструкция по установке и эксплуатации

Страница: 5 / 12

Panel Descriptions
REC OUT REC OUT INPUT 2 INPUT 2
R
L
CLASS 2 WIRING ACCEPTABLE CLASS 2 WIRING ACCEPTABLE
24V DC IN 24V DC IN OUTPUT OUTPUT
COM COM 4Ω 4Ω 8Ω 25V 70V 8Ω 25V 70V
+ – + –
INPUT 1
LINE PP MIC
MUTE SEND
ON OFF
PP
MIC
+
PHANTOM
POWER
5
6 7
10 11
12
9
8
6. External DC Supply Input
Connections for an external 24V DC supply to
power the amplifier.
7. Speaker Outputs
Output terminals for connection to either 70V,
25V, or low-impedance speaker types.
8. Input 1- Balanced LINE/MIC
Input 1 will provide an electronically-balanced
input with selectable gain suitable for line-
level signals, including dry loop telephone
signals as well as balanced low-impedance
microphones. The associated slide switch sets the
input for LINE, MIC or PP (MIC with phantom
power). This input can be set to mute Input 2
when active.
9. Mute Send
The ability of Input 1 to mute Input 2 can be
enabled or disabled using this switch.
10. Input 2 - Unbalanced AUX
Provides a high-impedance input through a
set of stereo combining RCA jacks. This input
is muted by Input 1 when muting is enabled.
11. REC Output
These RCA connectors provide a signal-level
output of the program material provided to the
speaker.
12. AC Mains
AC mains voltage will be provided through an
IEC connector with fuse holder and detachable
3-conductor IEC cord. The nominal line voltage
is 120V AC, 60 Hz.
REAR PANEL