BOGE FOCUS compressor control for piston compressors
Page 1
FOCUS
1.1
The BOGE control concept
Part 1: FOCUS
1.1 The BOGE control concept
Installation
FOCUS is a compressor control unit.
It is installed into the switch cabinet as part of the compressor and serves as
a compressor control device.
Prior to commissioning and before accomplishing any kind of maintenance or
servicing work please read the functional descriptions of both control and com-
pressor carefully. First and foremost observe the
Safety notes
in chapter 1 of
the functional description of the compressor.
Power input
Terminals A1 and A2 for 24V AC / DC
An interruption of the power supply is effected by means of the mains discon-
nector of the compressor.
Modules
The basic equipment of the FOCUS consists of a basic module and a keypad/
display unit (TAN).
Amongst others the following modules are optionally available:
–
with a – second – RS485 interface for the connection of additional com-
pressors if the serial interface is used for other purposes
–
with changeover contact relay; function can be selected by rotary switch
–
system pressure module for a system pressure transmitter on the master
compressor
Interconnection of the modules may only be completed in a currentless state
using the provided leads supplied with the equipment.
