6
Installation methods
Wall-mounting
This unit has screw holes on the rear of the unit for a wall-mounting bracket compliant with VESA MIS-F
(
M6 and a pitch of 200 mm
). A commercially available wall-mounting bracket compatible with MIS-F can
be used to install the unit on the wall.
Choose a wall-mounting bracket with a load capacity of over
15 kg
(the weight of this unit) .
Contact a specialist for wall-mounting.
Be sure to check that installation is properly done. If not , injury could occur.
Be aware that the wall may get dirty due to exhaust air from the vents and speakers.
Use the supplied screws when installing the wall-mounting bracket. If screws are not supplied,
compatible screws must be used.
Installation precautions for wall-mounting brackets
Other methods
When using commercially available stands, be careful not to damage the wooden frame of this unit.
Do not damage the screen with the stand.
When placing the unit on the floor or propping it against a wall, place a mat under the unit to prevent
the unit from slipping and falling.
