11
Operation
Turning on the unit
1
Connect the AC power cable to the AC connector
on the rear of the unit, and connect the other end of
the AC power cable to the power outlet.
The system will boot up.
2
The BOE logo will appear, then the content screen
will be displayed.
Please perform user registration by following the
instructions in the Quick start guide when this unit
is turned on for the first time after purchase, or
after resetting all settings to the factory defaults as
described in “Deleting the setting information” on
page 17.
Using the remote control
The menu will be displayed in the upper right corner of
the screen when pressing [MENU] on the remote control
while the content screen is displayed.
MENU button
To remove the menu, press it
again.
Continued on next page
¢
Prep. 2
Preparing the remote control
[Prep. 2]
Preparing the remote control
Prep. 3
Turning on the unit
[Prep. 3]
Turning on the unit
