10
Accessories
AC power cable (1)
Remote control (1)
User manual (1)
このたびは弊社製品をお買い上げいただきまして、誠にありがとうございます。
ご使用前に、この取扱説明書を必ずお読みになり、正しく安全にお使いください。
お読みになった後は、大切に保管してください。
Thank you for purchasing a BOE product.
For safe and proper use, please read this User Manual before using.
This User Manual should be saved for future reference.
Quick start guide (1)
w
Quick start guide
1
Perform member registration.
Member registration is required.
Access
https://view-topia.com/
Click here to go to the member registration
screen.
A temporary registration email will be sent after necessary
information is submitted. Follow the instructions in the email to
complete your member registration.
4
Perform user registration.
1
The following text will be displayed at the
bottom of the screen.
2
Press [MENU] to call up the Menu.
Select “User Registration” with the up/
down buttons on the remote control, and
press [OK].
3
“Information on user registration to Viewtopia”
will be displayed.
Check “Yes” by pressing [OK] on the remote
control.
4
The login ID and Password entry screen will be
displayed.
Enter information filled in step
1
by using the
software keyboard with the cursor buttons on the
remote control.
2
Connect the AC power cable.
Plug the AC power cable into the AC connector on the rear of
the unit, and plug the other end of the AC power cable into the
power outlet.
3
Connect to Wi-Fi.
1
The following message will be displayed when turning on the
unit.
2
Press [MENU] and follow the instructions on page 14 in
the User Manual to connect this unit to Wi-Fi.
MENU button
5
Download the dedicated App.
The dedicated App for smartphone/tablet can
be downloaded from the below QR codes.
Prep. 1
Confirming the accessories
[Prep. 1]
Confirming the accessories
Inserting the batteries
1.
Remove the battery cover
on the back of the remote
control.
2.
Confirm the polarity /
and insert the batteries
from the side first.
3.
Reattach the battery
cover.
Do not place batteries or the remote control in which the batteries are installed under direct sunlight, or near direct fire or
thermal appliances.
Batteries must be inserted from the side first.
Information
●
If operative distance with the remote control has shortened, the batteries are weakening. Replace with new batteries.
●
Use 2 manganese or alkaline dry-cell AAA batteries (1.5 V).
●
Remove the batteries from the remote control when not in use for a long period of time.
●
Do not mix new and old batteries, or different types of batteries (manganese, alkaline, etc.) together. Always choose the same
brand as each brand has its own unique characteristics. Mixing them together may cause heat generation, ruptures, or ignition.
●
Abide by your local regulations when disposing of used batteries.
Alkaline battery use precautions
Be sure to check that the outer coat of the alkaline battery is intact when using it.
Because the outer frame of an alkaline battery is the positive electrode, if its outer coat is torn or damaged and the negative
electrode spring in the battery compartment contacts the bare outer frame of the battery, it will short-circuit. This may cause
heat generation and burns.
Prep. 2
Preparing the remote control
[Prep. 2]
Preparing the remote control
