BODYTONE ZROT4, Инструкция по эксплуатации

Страница: 5 / 31

ENGLISH EXERCISE MONITOR INSTRUCTIONS FOR ZROT4 · ZROTH
After no message number entered for 30 seconds, the beehive device affects
the incoming wake-up
mode for 1 second.
press start key once, enter temporary stop mode every 30 seconds, when
entering temporary stop mode, all display will be kept on screen for 3
seconds and then evzy four seconds (3 bright / 1). After 5 minutes of
continuous stop, the beehive device will affect 2 seconds into awakening
mode, and press start to continue.
according to stop key influence for 1 second, time display total time, distance
display total distance quarantine, calories display total consumption hot 30
seconds, watt,speed,pace every five seconds to exchange the average and
maximum values.
85% when there is heartbeat entry, 65% heartbeat number and maximum
value are displayed every five seconds, if there is no heartbeat entry, it is not
shown.
If you press any program key to perform this activity.
INTERVAL Choice:
This function can press up/down selection function to enter at boot time, or
select shortcut key to enter directly at stop state..
5.1.CHOSE INTERVAL 20/10 :
A Press INTERVAL Key Chose INTERVAL20/10 , Press Enter Key , Enter model
INTERVAL20/10lighten ,
Beehive device and affect for 1 second at the same time
B. CYCLE TIME In the last three seconds, START, When inverting, the beehive
affects once a second, and READY O Once per second (0.75 bright / 0.25), the
count shows 0 / 08 (figure 5) .ht / 0.25), the count shows 0 / 08 (figure 5)
C. CYCLE TIME begin to count backwards 20 seconds and WORK Once a
second The beehive device is also affected synchronously. At this time, the
wheel will rotate. , start to count backwards from 4 minutes , TOTAL TIME.
DISTANCE CALORIES. WATTS. SPEED. PACE .Start count according to
transportation value, to show up to 01/08.
D CYCLE TIME Start to count backwards 10 seconds and REST Once a second
The beehive device is also affected synchronously. last 3 seconds READY It
also synchronizes with each other. , till to the stop.
E. C $ D repeat circle ,every time cycle add number 1 ,until show 08/08WOR-
Kafter exercise CYCLE TIME start to count back 10 seconds and REST once a
second time.
F. No single input after 30 seconds , Beehive device affects incoming
wake-up mode for 1 second.
G. Press START key one timp enter in pause model every 30seonds the
beehive device is affected,0.5seconds turn in the pause, all the date
information will show on the display. then flask in every 3 seconds ,continue
to pause in 5 minutes the beehive device is in the wake up model in 2
seconds, press
START key continue to work.
H. Press STOP bottom or end the beehive device in 1 second. , TIME.
DISTANCE. CALORIES show for 30 seconds, WATT. SPEED. PACE in every
5 second switch the average and maximum data,.
I. When enter the heart rate , 85%. 65% the heart rate number show
the maximum and average data in 5 seconds.
J. If press any PROGRAM Perform this action.
If you do not press any key, pace message number, heartbeat message number
60 seconds after automatic dormancy.
Fast motion mode:
If there is a space signal in the standby, input the quickstart immediately, the
buzzer will turn on at the same time for 1 second.
TOTAL TIME. TIME. DISTANCE CALORIES WATTS. SPEED. PACE Start count
according to transportation value (figure3).
The heartbeat symbol flashes when a heartbeat is entered ,and symbol
Bright and show the current heartbeat value (figure4) ; When you can't jump in P
C Continuous bright .