BodyCraft F703, Руководство пользователя

Страница: 5 / 16

Important Notes and Tips:
1. Before assembly, read all instructions thoroughly and preview diagrams to help make the
installation easier.
2. Make sure all parts are accounted for and in proper condition before beginning assembly.
See the parts list.
3. Be cautious not to damage the flooring when assembling. Place a protectant down such as a
rubber mat or shipping blanket.
4. Let plastics and weight stacks acclimate to room temperature before you begin assembly.
5. Two people are recommended for the safe assembly of this equipment.
6. Insert all bolts in the same direction when possible. Do not tighten until instructed.
7. Carefully install plastic caps using a rubber mallet.
8. When measuring bolt lengths, only measure the shank.
9. When the installation is complete, be sure to
regularly check for rust or damage, and
perform preventative maintenance.
Important Notes, Recommended Tools & Cleaners
THE FOLLOWING TOOLS ARE RECOMMENDED FOR ASSEMBLY:
SOCKET SET 3/8 DRIVE
WITH 6” EXT for 9/16 & 3/4 SAE
OPEN & CLOSED WRENCHES
for 9/16, 3/4 SAE & Adjustable
THE FOLLOWING TOOLS ARE RECOMMENDED FOR EASIER ASSEMBLY:
SOCKET SET WITH 3“ & 6”
EXTENSION for 13mm & 17mm
OPEN & CLOSED WRENCHES
for 13mm & 17mm
ALLEN WRENCHES SET
4mm to 10mm)
PHILLIPS SCREWDRIVERS
#2 w/ Magnetic TIP
TORQUE WRENCH 3/8
DRIVE
TIP ON FRAME ONLY: For extra
protection from fingerprints,
sweat stains or just plain dirt,
apply an automotive grade
cleaner wax if desired. Also
makes future cleaning easier.
THE FOLLOWING IS RECOMMENDED FOR CLEANING:
100% COTTON
CLEANING CLOTHS
(Do Not Use on the Upholstery) MILD CLEANING
SOLUTION