STEP 3
Leg Press Plate and Foot Platform Assembly
6
50
60
60
44
45
55
45
55
55
17
18
43
10
59
55
59
20
2
1
4
21
60
60
9
27
1. Attach the bottom side of the Foot Platform (10) to the Main Frame (1) by aligning the
holes and then inserting the solid Foot Platform Axle (20). Attach a 3/8" Nut (60) to each
side of the Foot Platform Axle (20).
2. Find the Foot Platform Adjuster Sleeve (17). Pull the Spring Knob (43) and insert the Foot
Platform Adjuster Inside Tube (18). Attach the Foot Platform Adjuster Sleeve (17) to the
Front Stabilizer (2), using one 1/2" X 3-1/2" Bolt (45), two 1/2" Washers (55) and one 1/2"
Nylon Nut (59).
3. Attach the Foot Platform Adjuster Inside Tube (18) to the Foot Platform (10) using one 1/2"
X 3- 1/2" Bolt (45), two 1/2" Washers (55), and one 1/2" Nylon Nut (59).
4. Attach a Back Pad (27) to the Leg Press Plate (9) using two 3/8" X 1" Hex Screws (50).
Attach the Leg Press Plate (9) to the Linear Bearing Assembly (4) by aligning the holes
and then inserting the solid Foot Plate Axle (21). Secure with a 3/8" Nut (60) on both
sides. Pull the Pop Pin (44) on the Linear Bearing Assembly (4) to adjust the Leg Press
Plate (9) to your desired angle.
