Body Sculpture BC-4626, Руководство пользователя

Страница: 12 / 17

11
E
E
X
X
E
E
R
R
C
C
I
I
S
S
E
E
C
C
O
O
M
M
P
P
U
U
T
T
E
E
R
R
BUTTONS:
MODE/
RESET To confirm all settings.
Press this button and hold for 2 seconds to reset all
function figures.
SET To set up the value of TIME, DISTANCE, CALORIES. You can hold the button to
increase the value fast. (The computer has to be in stop condition.)
FUNCTIONS
：
SCAN: Displays all function TIME → DISTANCE → CALORIES → RPM/SPEED in sequence.
RPM: Displays the pedaling Rotation Per Minute. The RPM and SPEED will switch to another display in
every 6 seconds after exercise starts.
SPEED: Displays the user’s exercise speed.
TIME: 1.You can press “SET” button to set target time between 0:00 to 99:00 for count down function.
2. It can be set up by the user or accumulated automatically for count up function.
DISTANCE: 1.Your can press “SET” button to set target distance between 0:00 to 99:50 for count down
function.
2. It can be set up by the user or accumulated automatically for count up function.
CALORIES: 1.You can press “SET” button to set target calories between 0 to 9990 for count down function.
2. It can be set up by the user or accumulated automatically for count up function.
OPERATION PROCEDURE:
1. Installs 1 piece of CR2032 3V battery, then the screen will display as following “Drawing A” and have “Bi”
sound at the same time, then enter to the calendar setting (year, month, day, and clock) and press
“MODE” button for confirmation.
After that, it goes to the next step to the main menu as “Drawing B”.
Drawing A Drawing B
2. Get access to the set-up mode of TIME/DISTANCE/CALORIES. When you are in each set- up mode,
for example in the time set-up mode, time value is blinking, you can press “SET” button to adjust the
value and press “MODE” for confirmation. The set-up of DISTANCE, CALORIES is the same as TIME.
3. With any signal been transmitted into the monitor, the value of TIME, DISTANCE, CALORIES start to
count up as Drawing C. When there is any function has been preset the target (TIME or DISTANCE or
CALORIES), the function will be counting down from the preset to zero while the training starts. Once
the target is achieved to zero, the monitor start to beep for 8 seconds, and the function will be counting
up from zero directly if the training is going. Press “MODE” button for confirmation and skip to next set-
up.