User Manual for BCL-X Series Laser Machine
16
III
Equipment Installation
3.1 Installation Preparation
3.1.1 Preparation for workplace
Make sure the working area is dry enough. And any electromagnetism, strong power,
pollution is forbidden. Temperature of working environment should be 10
℃
to 38
℃
,
humidity should be 10- 90%. AC 220V±10%, 50HZ, resistance to ground less than 5Ω.
3.1.2 Preparation for operator
We demand the operator must be professional technician. If the users want to install the
equipment on their own, they need to have training from our technicians and completely
master the knowledge of installation.
3.1.3 Preparation for tools
There is already a tool box with this machine. Besides, multimeter and screwdriver and
other detection tools are needed.
3.1.4 Other preparation
The users need to prepare relevant material,including purified water or
distilled water
for
water chiller, power strip, computer,pipe for discharge smoke, sample material, etc.
Attention: The users need to accompany all the time when our technicians install the
equipment. The users need to grasp the skills of installation and commissioning which
are the part of training.
3.2 Installation procedure
3.2.1 Package of laser tube
Laer tube package:
In case of damage during transportation or outside force, the tube is packed with sponge.
And two ends of tube are sealed with zip lock bag to prevent the mirror from pollution or
scratch. Finally, the tube is built up with sponge supports to prevent tube have direct
contact with surrounding.
