Bodet GSM CONTROL, Инструкция по установке и эксплуатации

Страница: 17 / 43

17
3.3.10. Other useful commands
3.3.10.1 Activation / deactivation of the “BLOCK” mode
Steps Command to be sent by SMS Description
A
STATUS # PINcode
Indication of the state of the product at the current
time to check the configuration.
B
SET BLOCK # PINcode
Activation of the "BLOCK" mode.
Please note that the activation of this function
prevents alerts from being triggered.
RESET BLOCK # PINcode
Deactivation of the "BLOCK" mode.
3.3.10.2 Using the NEWS function
Step Command to be sent by SMS Description
A
NEWSLETTER: YOURTEXT # PINcode
Sending a message to the GSM control.
Message: 140 characters max.
The sender receives the message back to
confirm that it has been taken into account.
This message will be forwarded to all contacts
in groups G1, G2, G3 and G4 because the
NEWS function is assigned to all these groups.
3.3.10.3 Viewing the contact list and details of a contact
Steps Command to be sent by SMS Description
A
TEST TEL # PINcode
Identification of the total number of phone
numbers stored in memory and the number of
numbers stored in each group.
B
TEST TEL GX # PINcode
Identification of saved contacts (name and
location) in each group.
(X= 1,2,3,4,5)
C
TEST TEL XX # PINcode
Identification of the contact (name, number and
assignment) from the location number
(XX
).
Other commands possible:
Command to be sent by SMS Description
TEST TEL33xxxxxxxxx # PINcode
Identification of the contact (name, location(s) and
assignment(s)) from its telephone number.
This command allows you to check whether a
number has already been registered and its
presence in the groups.
3.3.10.4 Changing the name of a contact
Steps Command to be sent by SMS Description
A
TEST TEL33xxxxxxxxx # PINcode
Identification of the contact (name, location(s) and
assignment(s)) from its telephone number.
B
SET TELNAME XX PERSON_NAME #
PINcode
Modification of the contact name (max 10
characters) from its location number (XX ).
This step must be done twice if a number is
stored in G5 and in another group because it
occupies two different memory locations.
EN