Boca Systems BEN1PA, Руководство пользователя, Страница: 20 / 40

20
BOCALANcard-PC
1. To install ODI Client drivers, run INSTALL from the Boca driver
diskette (refer to STEP 3 on pages 15-17).
2. To manually load your network files from the DOS prompt each
time the system is restarted, type the following commands in
the given order to initialize the DOS ODI driver support and the
IPL protocol stack. Be sure you in the current directory where
the files are located.
LSL.COM [ENTER]
PMXMLID.COM [ENTER]
IPXODI.COM [ENTER]
NETX.COM [ENTER]
3. To automatically load these files, use a DOS text editor to create
and/or modify a batch file, then save it to disk. You may use
your AUTOEXEC.BAT if you desire. Load the files in the
following order: PCMCIA card enabler, link support layer, LAN
Driver, protocol stacks, then the shell. Your batch file should
look similar to the following:
CD\<PATH> (change directory to location of files)
LSL.COM
PMXMLID.EXE
IPXODI.COM
NETX.COM
4. To change any default settings when the driver is loaded, you
must create a NET.CFG file on the workstation diskette. You can
use NET.CFG to change interrupt priority, port address, frame
type, and socket location. See Appendix D for more information.
Refer to the NetWare ODI DOS installation documentation for
more information on installing the DOS ODI driver.