Assembly Instructions for / Instruction Dassaemblage pour
DRESSER /MIRROR /COMMODE/MIRROIR
Caution : Please read instruction thoroughly before unpacking assembly parts. Sharp, exposed staple tips can
cause injury, therefore, for your protection, please remove any exposed staples used in packing.
1. We recommend that you should assemble this product with the assistance of another person; this will make
assembly easier, and willl help to eliminate damage to the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton
during shipment.
3. Please do not over tighten the screw or bolts.
4. Please put all parts on a none-abrasive floor before assembly, and follow the assembly steps to assemble your
newly purchased product correctly and effieciency.
PART LIST
NO
NAME
PART
CODE
QTY
A
Mirror / Miroir
-
1
B
Mirror Support
Slats / Support Du
Miroir
PTM100
MRSLT
2
HARDWARE LIST
NO
NAME
PART
CODE
QTY
1
JCBC M6 x 35mm
PTM100 MRHW
4
2
JCBC M6 x 40mm
4
3
M6 Spring Washer
8
4
M6 Flat Washer
8
5
Allen Key M4
1
HARDWARE LOCATED INSIDE MIRROR BOX
Page: 1 of 1
Assembly completed
/
Assemblage complet
l'emballage.
1. Nous vous recommandons d'assembler ce produit avec l'aide d'une autre personne; cela fera
l'assemblage.
3. Ne pas serrer la vis ou les boulons.
1
3
4
5
A
WARNING !
USE SHORT BOLT M6 x 35mm
A
B
ARROW MARKING - UP
**BACK VIEW
C
2
3
5
4
C
C
A
B
WARNING !
USE LONG BOLT M6 x 40mm
B
A
ARROW MARKING - UP
