The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
KB200-00
Issued 11/09
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions without notice.
© 2009 by Koala Kare Products, A Division of Bobrick.
Koala Kare Products
A Division of Bobrick
HORIZONTAL
WALL-MOUNTED
KB200-00
BABY CHANGING
CREAM
STATION
ADA Compliance
(when properly installed)
4.4.1 Max. Protruding Objects
4.2.5 Forward Reach
4.2.6 Side Reach
4.27.4 Operation
w
Finish Face of Floor
33
''
840mm
from floor
max
22-1/8''
562mm
Recommended Mounting Height Off Floor
F
or Barr
ier-F
ree Design
48'' 1219mm
Recommended
Mounting Height Off Floor
44-1/4'' 1124mm
4''
102mm
When Closed
Finish Face of Wall
20''
500mm
35''
890mm
S
S
S
16''
405mm
22''
550mm
Steel-on-Steel Hinge
Pneumatic Cylinder
Mounting Chassis
MATERIALS:
FDA approved injection-molded polypropylene with Microban
®
antimicrobial additive embedded into the bed surface.
Reinforced steel-on-steel hinge mechanism and metal mounting chassis with mounting hardware included. Labelled usage
instructions and safety messages in four languages. Optional Braille label available. Contoured changing surface area is
450 sq. in (11,430 sq. mm) and comes complete with nylon safety strap and bag hooks. Dual cavity liner dispenser holds
approximately 50 KB150-99 bed liners.
continued . . .