Bobrick AirCraft B-701 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 66

Bobrick AirCraft B-701 Скачать руководство пользователя страница 54

Page 4

INSTALLATION INSTRUCTIONS BOBRICK ECLIPSE

®

SURFACE-MOUNTED HAND DRYERS

Electrical Characteristics:

Models B-740 (Vitreous enamel cover), B-748 (Chrome-plated cover), 115V AC, 20 Amp,
2300 Watts, 50/60Hz, Single Phase; UL/c-UL Listed; cULus Listed.

Models B-740 (Vitreous enamel cover), B-748 (Chrome-plated cover), 208

–240V AC, 9–10

Amp, 1900

–2400 Watts, 50/60Hz, Single Phase; VDE Approved and CE marked, cULus

Listed, and CCC approved.

REMOVAL OF COVER

Start installation of dryer by removing cover. Loosen single cover-locking screw located in
recess in the air inlet/outlet grille using a Phillips-head screwdriver.

To remove cover, place a hand on each side of the cover and tip the bottom away slightly
from the air inlet/outlet grille. Lift the cover upwards to release the top retaining bracket from
the mounting base.

INSTALLATION OF MOUNTING BASE

An Installation Template is supplied with each unit.

«
...
52
53
54
55
56
...
»

Содержание AirCraft B-701



































































Отзывы:

Нет отзывов