User’s Manual- Lab Blender LS700A
Warning: Read manual before use
User
This product should be used under the
supervision of the director and others who can
understand the user’s manual.
AC input power
Be sure to check the following before
installing and using this product. Make sure
that the AC input power you use is the same as
the display on the back of this machine. The
AC input power must be connected to the
earth terminal as shown in the figure below.
(Earth terminal)
Please use included AC power cable. If you
want to use another cable inevitably, use a
AC power cable with a rated capacity of
250V 3A or higher.
Maintain and inspection
Remove the AC power cable from the outlet
before
performing
maintenance
and
inspection. If you need the assistant of
product inspection, contact your distributor
or manufacturer.
Warranty
If the products that are not clearly faulted by
consumers are eligible for free repair within
one year of purchase.
Products that fail due to consumer error or
are past warranty period may be repaired in
advance.
If you want to get a warranty service or
repair service,
contact
distributor or
manufacturer.
The shipping fees shall be paid by the
service client and the provider respectively.
Safety regulation
Do
not
repair
or
modify
without
authorization
or
assistant
of
the
manufacturer.
If you modify the product without
authorization,
we
cannot
guarantee
customer’s safety and product performance.
The consumer is responsible for this.
Safety symbol
The user must use it with sufficient caution
to avoid electric shock, and the user must be
protected from electrical hazards. Careless
use may result in equipment damage.
