BN Products AIRMATIC DBD Series, Руководство пользователя

Страница: 5 / 8

DBD-16X Bender Manual | Page 5
INSPECTION AND MAINTENANCE
WARNING: ALWAYS UNPLUG TOOL BEFORE PERFORMING MAINTENANCE.
DO NOT USE PARTS OR ACCESSORIES THAT ARE NOT
GENUINE DIAMOND BRAND from BN Products-USA
1. At least once a month remove the bottom plate and grease all the visible gears and pinions. At the
same time, check the carbon brushes for wear or damage. Replace with new brushes if they are
worn out.
2. Check that there are no loose nuts and bolts before starting the operation.
3. After operation is completed, be sure to remove metal dust, dirt, oil, etc… adhering to the ma-
chine surface.
4. In order to empty the metal dust from the bender, (remove side cover DBD-25X and DBD-32X
models) then tilt the machine to one side allowing the debris to fall out of the catch pan. Be sure
to blow out any remaining dirt and dust with compressed air prior to using the tool again (wear
safety goggles to block blowing debris).
1C1961A Carbon Brush