OUTDOOR REMOTE
CONTROL OUTLET 2-Pack
MODEL: BNC-60/154R
_________________________________________
TECHNICAL SPECIFICATIONS:
Voltage: 125VAC, 60Hz
Resistive: 15A 1875W
Tungsten: 10A 1250W
Transmission frequency: 433.92MHz
Remote battery: 12V 23A
PACKAGE CONTENTS:
(2)
OUTDOOR OUTLET RECEIVERS (“Receiver”) –
Figure 1
(2)
REMOTE CONTROLS (“Remote”) – Figure 2
(2)
BATTERY TYPE: 12V 23A
BATTERY INSTALLATION/REPLACEMENT:
Battery Installation/replacement:
o
Remove the two 12V 23A batteries
from the bags.
o
Open the battery compartment on
each Remote located on the back of
the Remote (Figure 3). The battery
compartment can be opened by
pushing the top of the battery door
down and sliding if off the Remote.
o
Replace the battery compartment door
by sliding it towards the top of the
Remote control.
o
Test for proper function by pressing
the ON button. A red light should
briefly illuminate at the top of the
Remote when the ON button is
pressed (Figure 4).
FEATURES:
Outdoor Receivers are IPX4 water resistant
when hung above the ground facing
downwards. Do not submerge the outlets or
operate near standing water.
The Remotes can control the Receivers up to
100 feet away in line-of-sight
In the event of a power outage, the Receiver
will remain in the OFF setting until the power
button on the Receiver is powered ON or the
Remote is used to power the Receiver ON.
Power output up to 1,875W at AC125V (60Hz)
DO NOT EXCEED A TOTAL OF 1,875W PER
RECEIVER
SETUP/OPERATION:
After installing the 12V 23A batteries in each of
the Remotes, plug the Receivers into the
desired grounded wall outlets.
Receivers can be controlled using the included
Remotes to turn ON/OFF or by using the
manual power button located on the top of each
Receiver.
A red light will appear above the power button
on the Receiver when the Receiver is powered
ON.
PUSH DOWN
SLIDE DOOR
OFF REMOTE
Figure 1
(Receivers)
Figure 2
(Remotes)
Figure 3
LED Indicator Light
Figure 4
