background image

Motor 

21 Jun 2017 

 

Page 5 of 28 

1

 

Motor 

1.1

 

Safety guidelines 

 

 

WARNING 

There is a risk of danger, if the safety instructions are not observed. 

Non-observance of safety information and instructions can lead to an electrical 
shock, fire and/or serious injuries. 

 

Please observe all safety information and instructions both in these 
and in all other instructions included with the E-Bike. 

 

CAUTION: Risk of burns from touching the motor casing. 

 

CAUTION: Risk of injury if the E-Bike system is activated 
unintentionally. Please remove the rechargeable battery before 
working on the E-Bike (e.g. assembly, maintenance, working on the 
chain etc.), or transporting or storing it. 

 

CAUTION: Risk of injury when using the pushing aid without the 
wheels touching the floor. Only use the pushing aid when pushing the 
E-Bike. 

 

CAUTION: Please do not make any changes to your E-Bike. Never try to 
increase the performance capability of the E-bike system; otherwise, 
you could reduce the service life of the parts and risk damage to the E-
Bike system and to the E-Bike. Also, any manipulation of the E-Bike 
system will invalidate the guarantee and warranty. Incorrect handling 
of the system also poses a risk to your safety and others on the road. 
If any unauthorised changes are made to the E-Bike system, there is a 
risk of high personal liability costs or even criminal proceedings, if the 
accident is a result of the manipulation. 

 

Observe all national regulations relating to the approval and use of E-
Bikes. 

 

Never open the motor. This is maintenance-free and may only be 
repaired by qualified specialists and only using original spare parts. 
This retains the motor safety. If the motor is opened without 
authorisation, the warranty becomes invalid. 

 

All components of the E-Bike system and parts that are mounted to 
the motor (e.g. chain wheel, chain wheel bracket, pedals) may only be 
replaced with parts approved by the cycle manufacturer. This protects 
the motor from damage (e.g. from overloading). 

 

Read and observe the safety instructions and information in the 
operating instructions of the rechargeable battery and in the E-Bike 
operating instructions. 

 

Please keep these instructions for future reference. 

1.2

 

Intended use 

The motor is only designed to drive your e-Bike and may not be used for other 
purposes. 

Содержание V7





























Отзывы: