3
Rechargeable battery
21 Jun 2017
Page 21 of 28
corresponds to about 20% of the capacity. The flashing LED shows the charging of the
next 20 %.
During the charging process, the charging status display is presented as follows:
LEDs
Charging status
0-19 %
20-39 %
40-59 %
60-79 %
80-99 %
100 %
3.6
Operation
3.6.1
Switch rechargeable battery on and off
One way of switching on the E-Bike system is to switch on the rechargeable battery.
Press the LED button on the rechargeable battery (see Figure 8,
page 18).
The LEDs of the charging status display shine briefly and then
show the current display status for approx. 4 seconds.
If the capacity of the rechargeable battery lies below 10 %, only the first LED on the
charging status display flashes (21).
To switch off the rechargeable battery, press the LED button for > 3
seconds (see Figure 8, page 18).
The LEDs of the charging status display (23) go off.
The E-Bike system is also switched off at the same time.
3.6.2
Operating modes of the rechargeable battery
Once it is switched on, the rechargeable battery is in
Active Mode
. If no further action
is taken (operation or moving the E-Bike), it remains in
Active Mode
for two hours.
The
Active Mode
is activated by pressing the LED button (24), by charging the
rechargeable battery or placing the rechargeable battery into the E-Bike.
To minimise the system's internal consumption, the rechargeable battery
automatically switches to the
Deep Sleep Mode
after 2 hours in
Active Mode
, if there
is no activity and if the display unit is switched off. The
Deep Sleep Mode
is also
activated if the LED button (24) or the On/off button of the display unit is pressed for
at least three seconds or if the rechargeable battery is not in the E-Bike for more
than 30 seconds.
3.7
Maintenance, cleaning and storage
Keep the rechargeable battery clean. Clean it carefully with a dry and soft cloth. The
rechargeable battery may not be dipped into water or cleaned with a water jet. If the
rechargeable battery no longer functions, please contact an authorised dealer. Only
place the rechargeable battery on a clean surface. In particular, avoid soiling on the
charging connections and the contacts. Clean dirty or corroded contacts with a mild
cleaning agent or penetrating oil and protect them with battery terminal grease.
Table
8
Charging status display
on the rechargeable
battery
Switching on
NOTE:
Switching off
Active Mode
Deep Sleep Mode
Cleaning
