BMW Z8, Руководство пользователя

Страница: 65 / 175

65 n
Index
Data
Technology
Repairs
Car care
Controls
Overview
The concept
DSC maintains vehicle stability even in
critical driving situations.
DSC maintains optimal, predictable
response while maximizing traction
when you accelerate from a standing
start or speed up while already
underway. The system recognizes any
tendency for the vehicle to assume an
instable attitude such as oversteer and
understeer, and counteracts this ten-
dency with a combination of graduated
reductions in engine torque and braking
intervention at individually selected
wheels. DSC provides optimal stability
– within the limits defined by the laws of
physics.
The system automatically assumes
operational status each time the engine
is started.
Indicator lamp
The indicator lamp in the instru-
ment cluster goes out shortly
after you switch on the ignition.
Refer to page 22 .
The indicator lamp flashes:
The system is actively regulating engine
torque and braking force.
The indicator lamp does not go out
after the engine is started, or it comes
on during normal driving and stays on:
There is a system malfunction or the
system was deactivated with the
button. You can continue to drive the
vehicle normally, but without DSC.
Please respond to any suspected
defects by referring the problem to your
BMW center.
To deactivate the system
Press the button, the indicator lamp
comes on and stays on.
When DSC is deactivated, you are
operating the vehicle in the conven-
tional drive mode.
In the following rare circumstances, it
may be effective to deactivate the DSC
for a short period of time:
>
When rocking the vehicle or starting
off in deep snow or on loose sur-
faces.
To maintain vehicle stability,
always drive with the system
switched on when possible.
<
520de035
Dynamic Stability Control DSC
Online Edition for Part No. 01 41 0 156 878 - © 06/02 BMW AG