BMW Z8 2000, Руководство пользователя

Страница: 39 / 172

38 n
Electric power windows
To open and close the windows
From ignition key position 1:
>
Press the switch up to but not past
the pressure point:
As long as you continue to hold the
switch down, the window will either
lower or raise
>
Press the switch briefly past the pres-
sure point:
The window moves automatically.
Tapping it again stops the opening
or closing action.
The window on the passenger
side cannot be closed with the
one-touch mode function.
<
520de015
Using switch number 2, you determine
which window is to be opened or
closed:
>
Window on the driver side,
push the switch all the way to the left
>
Window on the passenger side,
push the switch all the way to the
right
>
To move both windows at the same
time, keep the switch in the center
position.
The switch on the passenger-side door
activates the window for that side
alone.
After the ignition has been switched off:
You can still operate the electric win-
dows for up to 15 minutes, provided
that no door has been opened.
Because the power windows are
sealed at high pressure to prevent
wind noise when closed, a powerful
motor is required for efficient closing.
When closing the windows, always
ensure that they are not obstructed in
any way. Unsupervised use of these
systems can result in serious personal
injury. Remove the ignition key to deac-
tivate the electric power windows when-
ever you leave the vehicle. Never leave
the keys in the vehicle with unsuper-
vised children.
Never place anything that could obstruct
the driver's vision on or next to the
windows.
<
To use the convenience mode via the
door lock or the remote control, refer to
pages
30 or 32 .
Online Edition for Part No. 01 41 0 155 083 - © 03/00 BMW AG