BMW Z4, Руководство пользователя

Страница: 94 / 330

Overview
Power windows
Functional requirements
The windows can be operated under the follow‐
ing conditions.
▷ Standby state is switched on.
▷ Drive-ready state is switched on.
▷ The remote control is in the car's interior.
Opening
▷ Press the switch to the resistance
point.
The window opens while the switch is being
held.
▷ Press the switch beyond the resist‐
ance point.
The window opens automatically. Pressing
the switch again stops the motion.
Closing
▷ Pull the switch to the resistance
point.
The window closes while the switch is being
held.
▷ Pull the switch beyond the resist‐
ance point.
The window closes automatically if the door
is closed. Pulling again stops the motion.
Closing via Comfort Access, refer to page 78 .
Jam protection system
Concept
The jam protection prevents objects or body
parts becoming jammed between the door frame
and window while a window is being closed.
General information
If resistance or a blockage is detected while a
window is being closed, the closing action is in‐
terrupted and the window opens slightly.
Safety information
Warning
Accessories on the windows such as antennas
can impact jam protection. There is a risk of in‐
jury. Do not install accessories in the area of
movement of the windows.
Closing without the jam protection
system
In case of danger from the outside or if ice might
prevent normal closing, proceed as follows:
1. Pull the switch past the resistance
point and hold it there.
The window closes with limited jam protec‐
tion. If the closing force exceeds a specific
threshold, closing is interrupted.
2. Pull the switch past the resistance
point again within approx. 4 seconds and hold
it there.
The window closes without jam protection.
Convertible top
General information
The convertible top can be opened or closed at
speeds up to approx. 30 mph/50 km/h.
Seite 94
CONTROLS
Opening and closing
94
Online Edition for Part no. 01402779113 - II/19