BMW X5 xDrive45e PLUG-IN HYBRID 2022, Руководство пользователя

Страница: 348 / 444

Set the charge current strength at third-party
domestic socket outlets to the lowest level.
Maintaining the charge
state
If it is necessary to conserve the electrical
range for a later time during the trip, for ex-
ample, BATTERY CONTROL can be used to
maintain or increase the current charge state
of the high-voltage battery.
Charging cable
General information
Use a Mode 2 charging cable, Mode 3 charging
cable, or the permanently installed charging
cable of a charging station to charge the vehi-
cle.
Different charging cables can be required de-
pending on the country.
Safety information
Warning
Non-compatible charging cables or unsuita-
ble charging stations can heat up and cause
damage to the vehicle. There is a risk of fire.
Use charging cables or charging stations for
charging that are suitable for the respective
vehicle type.
An authorized service center will be glad to
provide information about suitable charging
cables.
Warning
Improper use of the charging cable can pre-
vent charging and lead to damage, for in-
stance cable fire. There is a risk of fire. Use
the charging cable only for charging the ve-
hicle, and do not extend it using cables or
adapters.
Warning
Damaged charging cables can heat up or
lead to an electric shock. There is a risk of fire
or an injury hazard. Use undamaged charg-
ing cables only.
Mode 2 charging cable
Depending on the national-market version, the
vehicle scope of delivery includes a Mode 2
charging cable.
Mode 2 charging cables can be used to charge
the vehicle from grounded domestic socket
outlets. Charging at domestic socket outlet
electrical connections is performed with alter-
nating current.
When a Mode 2 charging cable is used, the
efficiency values may differ from those stated
on the energy label.
The Mode 2 charging cable is also referred to
as standard charging cable.
Mode 3 charging cable
Depending on the national-market version, the
vehicle scope of delivery includes a Mode 3
charging cable.
The Mode 3 charging cable makes it possible
to quickly recharge at sockets of designated
AC charging stations using a special connec-
tor. Charging is performed with alternating cur-
rent at designated AC charging stations. The
charging process can be completed faster than
at domestic socket outlets.
A charge current level up max. 16 A is possible.
The charging cable may be permanently in-
stalled at the charging station.
The Mode 3 charging cable is also referred to
as AC quick charging cable.
Seite 348
MOBILITY Charging the vehicle
348
Online Edition for Part no. 01405A604A9 - VI/22