BMW X5 - CATALOGUE, Руководство пользователя

Страница: 234 / 440

Continuing cruise control
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, uninten‐
tional deceleration or acceleration may occur.
Press the button with the system inter‐
rupted.
Cruise control is continued with the stored val‐
ues.
In the following cases, the stored speed value is
deleted and cannot be called up again:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
Displays in the instrument
cluster
Display in the speedometer
Depending on the equipment, a mark in the
speedometer displays the status of the system.
▷ Green marking: system is ac‐
tive, the marking indicates the
desired speed.
▷ Grey marking: system is inter‐
rupted, the marking indicates
the stored speed.
▷ No marking: system is switched off.
Indicator light
▷ Indicator light green: system is active.
▷ Gray indicator light: the system has
been interrupted.
▷ No indicator light: system is switched off.
Displays in the Head-up Display
Some system information can also be displayed
in the Head-up Display.
The icon is displayed when the set
speed is reached.
System limits
The set speed is also maintained downhill. The
speed may not be maintained on uphill grades if
the drive power is insufficient.
In ECO PRO driving mode, the vehicle may ex‐
ceed or drop below the set desired speed in
some situations, for instance on downhill or uphill
grades.
Active Cruise Control with
Stop&Go function ACC
Principle
Using the Cruise Control, a desired speed and a
distance to a vehicle ahead can be adjusted us‐
ing the buttons on the steering wheel.
General information
The system maintains the set speed on clear
roads. The vehicle accelerates or brakes auto‐
matically.
If a vehicle is driving ahead of you, the system
adjusts the speed of your vehicle so that the set
distance to the vehicle ahead is maintained. The
speed is adjusted as far as the given situation al‐
lows.
The distance can be adjusted in several steps.
For safety reasons, it depends on the respective
speed.
If the vehicle ahead of you brakes to a halt, and
then proceeds to drive again within a brief period,
the system is able to detect this within the given
system limits.
Depending on the vehicle setting, the cruise
control settings may change under certain condi‐
tions. For instance, acceleration can change de‐
pending on the driving mode.
Seite 234
CONTROLS
Driver assistance systems
234
Online Edition for Part no. 01405A37D22 - VI/21