BMW X3 xDrive20d 2013, Руководство пользователя

Страница: 268 / 312

5. Undo three fastenings on the bulb holder
and remove bulb holder from the rear light.
6. Turn bulb and remove. The turn indicator is
the top bulb, the rear light/brake light is the
bottom bulb on the bulb holder.
7. To install the new bulb and reattach the bulb
holder, carry out the above steps in reverse
order. Ensure that the bulb holder is en‐
gaged in all fastenings.
8. Connect up rear lights and fit.
9. Put the cover with the three brackets in the
rear light. By pressing on the upper and
lower bracket, push the cover downwards
until it engages.
Reversing light and fog light
Follow the instructions regarding bulbs and
lights, see page
264 .
Reversing light: 16 watt bulb, W16W
Rear fog light: 21 watt bulb, H21W
1. Opening the tailgate.
2. Pull out cover on handle recess, see arrow.
3. Loosen connector.
4. Remove bulb holder from rear light.
Reversing light is the upper light, the fog
light is the lower light on the bulb holder.
5. To change the reversing light, carefully pull
out the bulb.
To change the rear fog light, push the bulb
downwards and turn it towards the left.
6. To install the new bulb and reattach the bulb
holder, carry out the above steps in reverse
order.
Ensure that the bulb holder is correctly in‐
serted.
Changing a wheel
Notes
Due to the vehicle equipment, no spare wheel is
available.
For tyres with emergency running properties or
when using tyre sealants, immediate wheel
change for tyre pressure loss in case of break‐
down is not required.
The tools for changing wheels are available as
optional accessories from your Service centre.
Jack mounting points
The jacking points are at the positions marked.
Thiefproof wheel studs
The thiefproof wheel studs can be found in the
tool kit or in an oddments tray in the tool kit, see
page
263 .
Seite 268
Mobility Replacing parts
268
Online Edition for Part no. 01 40 2 900 867 - 03 12 490