BMW X2 2021, Руководство пользователя

Страница: 139 / 304

Canada: roadside parking light
Concept
The vehicle can be illuminated on one side.
Switching on
With radio-ready state switched off, press the
lever either up or down past the resistance point
for approx. 2 seconds.
Switching off
Briefly press the lever to the resistance point in
the opposite direction.
Welcome lights and
pathway lighting
Welcome lights
General information
Depending on the vehicle equipment and the
ambient brightness, individual light functions may
be switched on briefly when the vehicle is un‐
locked.
Activating/deactivating
Position of switch: ,
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. "Welcome lights"
The setting is stored for the driver profile cur‐
rently used.
Pathway lighting
General information
The low beams stay lit for a short while if the
headlight flasher is switched on after the radio-
ready state is switched off.
Setting the duration
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. "Pathway lighting"
6. Set length of time.
The setting is stored for the driver profile cur‐
rently used.
Automatic headlight
control
Concept
The low beams are switched on and off automat‐
ically depending on the ambient brightness, for
example in tunnels, in twilight or if there is pre‐
cipitation.
General information
A blue sky with the sun low on the horizon can
cause the lights to be switched on.
The low beams always stay on when the fog light
is switched on.
Seite 139
Lights
CONTROLS
139
Online Edition for Part no. 01405A2CF16 - II/21