BMW X1 2018, Руководство пользователя

Страница: 216 / 314

Cargo area partition net
Cargo area partition net, large
When the rear seat backrest is folded down, in‐
stall the large cargo area partition net behind the
front seats.
1. Fold down the rear seat backrests, refer to
page
213 .
2. Open the lids above on the roof frame until
they engage.
3. Insert each of the two top retaining pins of
the cargo area partition net into the recepta‐
cles until they reach the stop, arrow 1, and
push them forward.
4. Hook the lower three hooks of the cargo area
partition net into the three eyes of the folded
down rear backrest, arrow 2, raising the back‐
rests slightly, if needed.
Make sure that the lower hooks are hooked
into the eyes from behind.
Cargo area partition net, small
With upright rear backrests, install the small
cargo area partition net behind the second row of
seats.
1. Remove the cargo cover.
2. Insert each of the two top retaining pins of
the cargo area partition net into the recepta‐
cles until they reach the stop, arrow 1, and
push them forward.
3. Use the two lower hooks to hook the cargo
area partition net into the upper eyes in the
cargo area, arrow 2.
Ski and snowboard bag
The ski and snowboard bag is contained in a
protective jacket in the cargo area.
Follow the installation and owner's manual in‐
cluded in the protective jacket.
Seite 216
CONTROLS
Interior equipment
216
Online Edition for Part no. 01402120596 - II/18