BMW S 1000XR 2018 Скачать руководство пользователя страница 57

Страница: 57 / 241

Switch on ASC

Press and hold the

button

until the ASC indicator and
warning light

changes its

display behavior.

ASC indicator and warning
light goes out, and starts

to flash if self-diagnosis has not
been completed.

Release button

within two

seconds.

ASC indicator and warning
light remains off or contin-

ues to flash.

ASC activated.

Dynamic Traction
Control (DTC)

with Dynamic Traction Control
(DTC)

Deactivating DTC

Switch on the ignition.

NOTICE

The Dynamic Traction Control
(DTC) can also be deactivated
while riding.

Press and hold the

button

until the DTC --indicator light

changes its display behavior.

DTC indicator light starts to
light up.

Release button

within two

seconds.

DTC indicator light contin-
ues to be lit up.

DTC is deactivated.

Switching on DTC

Press and hold button

un-

til the DTC indicator light

changes its behavior.

DTC indicator light goes
out, and if self-diagnosis

Operation

Содержание S 1000XR 2018


















































































































































































































































Результаты поиска

Содержание S 1000XR 2018

Отзывы:

BMW S 1000XR 2018, Руководство пользователя для мотоциклиста, Страница: 57 / 241

Результаты поиска

Содержание S 1000XR 2018

Отзывы: