BMW S 1000 RR - 2010 Скачать руководство пользователя страница 44

Страница: 44 / 178

ABS warning light contin-
ues to light up.

ABS function is switched off.

Switching on ABS
function

Press and hold button

un-

til the ABS warning light

changes its display behavior.

ABS warning light goes
out; if self-diagnosis has

not been completed, it begins to
flash.

Release button

within two

seconds.

ABS warning light remains
off or continues to flash.

ABS function is switched on.
If the coding plug is not used
for the SLICK function, as an
alternative, the ignition can be
switched off, then on again.

If the ABS light continues
to light up after switching

the ignition off and then on again,
an ABS fault has occurred.

Dynamic Traction
Control (DTC)

with BMW Motorrad Race ABS
and DTC

Switching off DTC
function

Switch on ignition.

The DTC function can
also be deactivated while

driving.

Press and hold button

un-

til the DTC warning light

changes its display behavior.

DTC warning light begins
to light up

Release button

within two

seconds.

DTC warning light contin-
ues to light up.

DTC function is switched off.

Operation

Содержание S 1000 RR - 2010



















































































































































































Результаты поиска

Содержание S 1000 RR - 2010

Отзывы:

BMW S 1000 RR - 2010, Руководство пользователя для мотоциклиста, Страница: 44 / 178

Результаты поиска

Содержание S 1000 RR - 2010

Отзывы: