BMW S 1000 RR - 2010 Скачать руководство пользователя страница 111

Страница: 111 / 178

Checking engine oil level
(

Install cap of engine oil fill loca-
tion

Brake system

Checking brake operation

Pull handbrake lever.
Pressure point must be clearly
perceptible.
Press footbrake lever.
Pressure point must be clearly
perceptible.

If no clear pressure points are
perceptible:

Incorrect working practices
endanger the reliability of

the brakes.
Have all work on the brake sys-
tem carried out by specialists.

Have the brakes checked by a
certified workshop, preferably
an authorized BMW Motorrad
retailer.

Checking front brake pad
thickness

Make sure ground is level and
firm and park motorcycle.
Turn handlebars.

Visually inspect left and right
brake pads to ascertain their
thickness. Direction of view:
From rear looking at brake
pads

Front brake-pad wear
limit

min 0.03 in (min 0.8 mm)
(Only friction material with-
out carrier plate)

If brake pads are worn:

Dropping below the mini-
mum pad thickness leads

to reduced braking performance
and may result in damage to the
brakes.
In order to ensure the operating
reliability of the brake system,
make sure that the brake pads
are not worn beyond their mini-
mum thickness.

Have the brake pads replaced
by a specialized workshop,
preferably an authorized BMW
Motorrad retailer.

If genuine BMW Motorrad
brake pads are not installed,

109

Maintenance

Содержание S 1000 RR - 2010



















































































































































































Результаты поиска

Содержание S 1000 RR - 2010

Отзывы:

BMW S 1000 RR - 2010, Руководство пользователя для мотоциклиста, Страница: 111 / 178

Результаты поиска

Содержание S 1000 RR - 2010

Отзывы: